UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Sets, Parts and Service Information Wanted (private buyers only, no swaps) (https://www.vintage-radio.net/forum/forumdisplay.php?f=28)
-   -   Racal PCBs (https://www.vintage-radio.net/forum/showthread.php?t=193412)

Sparky67 6th Aug 2022 12:35 pm

Racal PCBs
 
Hi all,

Bit of a long shot I know but I’m looking for a scrap IF board used in some Racal transceivers in their 4000-series era. Specifically board numbers:

MA4040A (PRM4041A)
719171 (PRM4021)
704737 (PRM4031 & VRM4156, possibly VRM4155 etc too?)

It’s the dual-AGC thick film, part number CR711476, which I’m in need of to repair my radio and these sets all appear to use that part. Help with a board or suggestions where one, or the thick film, might be found would be very gratefully received.

Thanks.

Martin
G4NCE


All times are GMT. The time now is 11:03 pm.

Powered by vBulletin®
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.