UK Vintage Radio Repair and Restoration Discussion Forum

UK Vintage Radio Repair and Restoration Discussion Forum (https://www.vintage-radio.net/forum/index.php)
-   Homebrew Equipment (https://www.vintage-radio.net/forum/forumdisplay.php?f=99)
-   -   Loftin-White with 6C33C valves (https://www.vintage-radio.net/forum/showthread.php?t=152929)

SSassen 7th Jan 2019 11:52 am

Loftin-White with 6C33C valves
 
Good afternoon gentlemen,

Please allow me to give a brief introduction. I’ve not tinkered with tubes since the ‘90s, but as I’m getting older the desire to do so becomes stronger.

I’ve been fortunate enough to be able to start a collection of parts over the years and am currently evaluating various single-ended designs around the Russian 6C33C, as I have a number of these available.

I find the Loftin-White design intriguing, but am not (yet) capable of adapting that to the 6C33C. I have profound (20+ years) of experience as an electronics engineer, but I’ve never worked with tubes in my line of work.

So I’m wondering whether there’s any designs to be found that can be adapted to the 6C33C, or whether anyone can offer some design assistance?

Looking forward to the replies on this query.

Thanks and best regards,

Sander Sassen.

peter_scott 7th Jan 2019 12:35 pm

Re: Loftin-White with 6C33C valves
 
Hi Sander,

Darius (Old Europe on this forum) has done a lot of work on Loftin White designs.

See: http://rl12t15.blogspot.com/2007_09_01_archive.html

Peter

SSassen 7th Jan 2019 3:16 pm

Re: Loftin-White with 6C33C valves
 
Thanks Peter, I’ve sent him a message.


All times are GMT +1. The time now is 7:00 pm.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.