UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Radio (domestic)

Notices

Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only.

Closed Thread
 
Thread Tools
Old 13th Sep 2017, 3:02 pm   #1
linus86
Retired Dormant Member
 
Join Date: Sep 2017
Location: Karlstad, Sweden
Posts: 3
Default Dial cord, Beomaster 900 M

I have problem with the dial cord, it´s not broken but it came of the "Tuning capacitor pulley". I can´t figure out how to put back on.
Attached Thumbnails
Click image for larger version

Name:	20170911_17354022.jpg
Views:	78
Size:	39.6 KB
ID:	149383  
linus86 is offline  
Old 13th Sep 2017, 3:37 pm   #2
kevinaston1
Hexode
 
Join Date: Aug 2014
Location: Featherstone, West Yorkshire, UK.
Posts: 386
Default Re: Dial cord, Beomaster 900 M

I have a PDF service manual, page 20 shows the stringing of the dial cord.

PM me if you need a copy.


Kevin
kevinaston1 is offline  
Old 13th Sep 2017, 7:21 pm   #3
linus86
Retired Dormant Member
 
Join Date: Sep 2017
Location: Karlstad, Sweden
Posts: 3
Default Re: Dial cord, Beomaster 900 M

I will check that out, thank you.
I can't figure out to get cord on the right way. It is like the cord is too long. I can make it fit one way but then the cord is "loose" from the other way.
linus86 is offline  
Old 14th Sep 2017, 5:34 pm   #4
linus86
Retired Dormant Member
 
Join Date: Sep 2017
Location: Karlstad, Sweden
Posts: 3
Default Re: Dial cord, Beomaster 900 M

Problem solved. It was a wrongly mounted spring.

Thanks for the help with the manual!
linus86 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 4:57 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.