UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Audio (record players, hi-fi etc)

Notices

Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment.

Closed Thread
 
Thread Tools
Old 26th Apr 2012, 12:30 pm   #1
sparkymike
Octode
 
Join Date: Dec 2006
Location: Colchester, Essex, UK.
Posts: 1,063
Default RSC Guitar Amplifier.

I am trying to rejuvenate an old RSC guitar amplifier that has been lying dormant in the loft for several years. Am I correct in that RSC were Radio Spares of Croydon? I seem to remember seing these amplifiers for sale in the 50's or 60's. Budget model much cheaper than anyone else at the time.
However, I am in dire need of a circuit, mainly to make sure it has the correct valves in the correct bases. I have switched it on for a brief period and there is the lack of reidual hum from the speaker and thus no output. All the valves have anode current, but apart from the rectifier which is correct, the others valves may not be in correct bases. (A good case for marking the chassis with valve numbers.) I will upload photos later.
I bought this unworking with some other radios so it has never worked yet in my posession I hasten to add.
Mike.
Attached Thumbnails
Click image for larger version

Name:	RSC Guitar Amplifier 001.jpg
Views:	843
Size:	55.5 KB
ID:	65766   Click image for larger version

Name:	RSC Guitar Amplifier 002.jpg
Views:	699
Size:	102.3 KB
ID:	65767  

Last edited by sparkymike; 26th Apr 2012 at 12:43 pm.
sparkymike is offline  
Old 26th Apr 2012, 1:03 pm   #2
Bill
Pentode
 
Join Date: Dec 2005
Location: Denton, Manchester, UK.
Posts: 186
Default Re: RSC GuitarAmplifier

Radio Supply Co. based in Leeds. there were several models , for hi fi, guitar & bass (eg Bass Regent in theory=30w ) Early models used 807s in the output, later EL34.
They were ok for the money and fairly reliable as I recall. I have a feeling they were actually made by Linear ( as in Linear Conchord) somewhere in Yorkshire. Is yours a single ended EL84 about 3w? The circuits were pretty standard , nothing funny going on.
Bill
Bill is offline  
Old 26th Apr 2012, 1:06 pm   #3
yestertech
Nonode
 
yestertech's Avatar
 
Join Date: Dec 2002
Location: Coulsdon, Surrey, UK.
Posts: 2,109
Default Re: RSC GuitarAmplifier

RSC were Radio Supply Co. in Leeds
Have a look here at the A11 which is similar to yours

http://www.chambonino.com/work/linear/lin10.html

Looks like a kit job, but yours appears to have been built without the first preamp stage

Others will know more - Was RSC effectively the same company as "Linear" ?

Andy
yestertech is offline  
Old 26th Apr 2012, 1:42 pm   #4
sparkymike
Octode
 
Join Date: Dec 2006
Location: Colchester, Essex, UK.
Posts: 1,063
Default Re: RSC GuitarAmplifier

I have had two Linear Concords in my time and they look very much like this amp re. wiring.
I would be interested if anyone has an advert of the time when this was new.
Mike.
sparkymike is offline  
Old 26th Apr 2012, 2:07 pm   #5
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: RSC Guitar Amplifier.

Mike. Looking at a PW advert from November 1966 it would appear that this is an R.S.C A11 12-14 Watt amplifier. Price then £8:15:0 in kit form or £11.15.0 ready built.

SellerS were R.S.C Hi-Fi Centres Ltd. They had branches all over the place, but the mail order centre was in Leeds.

Line up was 2 X ECC83s, 2 X EL84s and an EZ81.

Any chance of a picture of the front panel.
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is offline  
Old 26th Apr 2012, 3:12 pm   #6
AC/HL
Dekatron
 
AC/HL's Avatar
 
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,637
Default Re: RSC Guitar Amplifier.

Also from the site Andy posted

http://www.chambonino.com/work/linear/info1.html

The photo in post 1 only has 4 valves, so probably a single ended output, but the photo also appears to show two EL84 size valves ??

Last edited by AC/HL; 26th Apr 2012 at 3:15 pm. Reason: Brain in gear
AC/HL is offline  
Old 26th Apr 2012, 3:25 pm   #7
sparkymike
Octode
 
Join Date: Dec 2006
Location: Colchester, Essex, UK.
Posts: 1,063
Default Re: RSC Guitar Amplifier.

Well had a chance to try and puzzle out the valves. I am mystified by the ECC83, or whatever it should be. The heaters are pins 5 and 9, but I thought that ECC83 pins were 4 & 5 Anyone got any clues about this? That valve position is top left in the photo. I can do a close up if required. The heater lights up when powered up.
I have also uploaded the cabinet details. I would like to know the make of the speaker.
Mike.
Attached Thumbnails
Click image for larger version

Name:	RSC Guitar Amplifier 003.jpg
Views:	463
Size:	65.5 KB
ID:	65775   Click image for larger version

Name:	RSC Guitar Amplifier 004.jpg
Views:	577
Size:	62.2 KB
ID:	65776   Click image for larger version

Name:	RSC Guitar Amplifier 005.jpg
Views:	493
Size:	73.1 KB
ID:	65777  
sparkymike is offline  
Old 26th Apr 2012, 3:30 pm   #8
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: RSC Guitar Amplifier.

Pin 9 is a heater centre tap.
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is offline  
Old 26th Apr 2012, 3:43 pm   #9
XTC
Retired Dormant Member
 
Join Date: Oct 2004
Location: Bristol, UK.
Posts: 837
Default Re: RSC Guitar Amplifier.

RSC had a regular, rather crowded, two page ad in PW, and I think PE, through the late 60s to at least October 1971, the date of the PW from which I've taken the ad.

As Graham says, this looks like the A11 hi-fi 12-14 watt amplifier. The picture is a little different, but they could have altered the layout and transformers a bit (the ones in the picture look shrouded), or it might be an artist's impression.

I suspect RSC were a sales and marketing company, not design and manufacture.

There was another company called Radio Component Specialists, who were based in Croydon. They sold the odd amplifier but mainly sold parts, record decks, transformers etc.

Pete.
Attached Thumbnails
Click image for larger version

Name:	IMG_3004.JPG
Views:	533
Size:	125.9 KB
ID:	65778  
XTC is offline  
Old 26th Apr 2012, 3:52 pm   #10
sparkymike
Octode
 
Join Date: Dec 2006
Location: Colchester, Essex, UK.
Posts: 1,063
Default Re: RSC Guitar Amplifier.

What is the idea behind the heater centre tap? Is that to make it fail safe if one tap goes down?
Mike.
sparkymike is offline  
Old 26th Apr 2012, 3:53 pm   #11
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,192
Default Re: RSC Guitar Amplifier.

It's so the valve can be operated from 12V (filaments in series) or 6V (filaments in parallel). Not sure what happens if you only use one filament.

Do you have a link between pins 4 and 5?
__________________
Graham. Forum Moderator

Reach for your meter before you reach for your soldering iron.
Station X is offline  
Old 26th Apr 2012, 4:13 pm   #12
AC/HL
Dekatron
 
AC/HL's Avatar
 
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,637
Default Re: RSC Guitar Amplifier.

It was possibly sold as a guitar practice amplifier, and not in a chassis only version, hence the unshrouded transformers. What are the controls labelled?

PS the speaker is probably a Fane

Last edited by AC/HL; 26th Apr 2012 at 4:23 pm. Reason: PS
AC/HL is offline  
Old 26th Apr 2012, 4:23 pm   #13
Bazz4CQJ
Dekatron
 
Bazz4CQJ's Avatar
 
Join Date: Apr 2009
Location: Oxfordshire, UK.
Posts: 4,924
Default Re: RSC Guitar Amplifier.

I'm not sure about the exact business arrangements, but certainly some of the RSC stuff was built in Leeds as one or two of the local hams worked there. G3TDZ springs to mind, as he used to publish various amateur projects in SW Mag. There was a guy called Trevor who managed the RSC shop in the Grand Arcade (or Victoria arcade?) in Leeds before moving on to Globe Scientific owned by a guy called Gerry, who were popular purveyors of SW radios, car battery chargers (built by schoolboy me!) and unmarked transistors .
I think RSC wound all their own transformers, both for use on the amps and for sale in the shops.
Bazz4CQJ is offline  
Old 26th Apr 2012, 5:36 pm   #14
kalee20
Dekatron
 
Join Date: Feb 2007
Location: Lynton, N. Devon, UK.
Posts: 7,061
Default Re: RSC Guitar Amplifier.

I have an idea that the company, which traded under the name RSC, changed what they claimed the letters stood for from Radio Supply Co to Realistic Sound Centres, at some point in the 1970's.

I have a few transformers which I bought from them - I'm sure they had their own winding shop.

As noted above, Radio Component Specialists is another outfit.

As to the valve line-up, the valveholders with pins 4 & 5 linked must be ECC83's (the heater power supplied betwen pin 9 and pins 4 & 5. The valveholder with several (4?) connections to the mains transformer - possibly with low-value resistors in series with a couple of wires - must be the EZ81. The remaining two valveholders, by elimination, must be the EL84's.
kalee20 is offline  
Old 26th Apr 2012, 5:58 pm   #15
sparkymike
Octode
 
Join Date: Dec 2006
Location: Colchester, Essex, UK.
Posts: 1,063
Default Re: RSC Guitar Amplifier.

I now think I have worked out the valve line up. It is very slightly like the Mullard 7watt stereophonic amplifier, but one channel.
This amp used ECC83 and two ECL 82's and EZ 81. My unmarked valve would seem to be ,or should be an ECL 82 I think. I had thought it was single ended output which was leading me up the blind alley, but I am now certain that it is push pull, as most of the resistors on both bases are duplicated. The ECL 82 looks like it is used in both modes ie. triode and pentode, thus saving components on a low price amplifier.
A circuit would still be very handy.
Mike.
sparkymike is offline  
Old 26th Apr 2012, 6:20 pm   #16
XTC
Retired Dormant Member
 
Join Date: Oct 2004
Location: Bristol, UK.
Posts: 837
Default Re: RSC Guitar Amplifier.

Quote:
Originally Posted by AC/HL View Post
Also from the site Andy posted

http://www.chambonino.com/work/linear/info1.html

The photo in post 1 only has 4 valves, so probably a single ended output, but the photo also appears to show two EL84 size valves ??

On that page there's something about the history of RSC and further down there's an ad including the A11. Its just about possible to read the valve line up, which is ECC83 x2, EL84 x2 and EZ81, as Graham said.

In the ad there's also the RSC Senior 15 watt lead and rhythm guitar amplifier which looks a bit like Mike's.

I would have thought they would stick to EL84s and push them a bit harder, rather than use ECL86s.

Pete.
XTC is offline  
Old 26th Apr 2012, 7:48 pm   #17
Valvepower
Octode
 
Valvepower's Avatar
 
Join Date: Aug 2008
Location: Rayleigh near Southend-On-Sea, Essex, UK.
Posts: 1,852
Default Re: RSC Guitar Amplifier.

Hi,

That’s my RSC A11 on John Chambers amp site. As you’ll see it was a bit of a basket case when I first got it.

There was a thread (link below) on this site about this and Linear amplifiers.

https://www.vintage-radio.net/forum/...id=2&styleid=2

Regards
Terry.
Valvepower is offline  
Old 26th Apr 2012, 7:56 pm   #18
Radio Wrangler
Moderator
 
Radio Wrangler's Avatar
 
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,801
Default Re: RSC Guitar Amplifier.

I do believe RSC used to sell a lot of Fane speaker drive units. Best first guess for what's in that cabinet. I used to look in occasionally at their shop in Thornton's Arcade, Leeds.

David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done
Radio Wrangler is offline  
Old 26th Apr 2012, 8:25 pm   #19
Valvepower
Octode
 
Valvepower's Avatar
 
Join Date: Aug 2008
Location: Rayleigh near Southend-On-Sea, Essex, UK.
Posts: 1,852
Default Re: RSC Guitar Amplifier.

Hi,

I agree it’s a Fane or an Audiotrine speaker, which are one and the same thing, as Audiotrine were re-badged Fane speakers and sold via the RSC shops.

Terry.
Valvepower is offline  
Old 27th Apr 2012, 7:29 am   #20
sparkymike
Octode
 
Join Date: Dec 2006
Location: Colchester, Essex, UK.
Posts: 1,063
Default Re: RSC Guitar Amplifier.

Well it now looks like I will have to draw out the circuit as a small resistor in the output circuit has drawn a high current and gone pop.!! One side goes to earth and the other goes to each output valve via two 1 meg resistors to pins 1 (triode grid.)
I have marked the resistor on the thumbnail.
Mike.
Attached Thumbnails
Click image for larger version

Name:	RSC Guitar Amplifier 002.jpg
Views:	518
Size:	102.4 KB
ID:	65832  
sparkymike is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 6:52 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.