UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Reply
 
Thread Tools
Old 13th Sep 2017, 10:50 pm   #21
Argus25
Heptode
 
Argus25's Avatar
 
Join Date: Oct 2016
Location: Maroochydore, Queensland, Australia.
Posts: 781
Default Re: Measuring half wave voltages on Valve Testers.

Quote:
Originally Posted by ms660 View Post
My old Hikock based I-177b valve tester used full wave rectification for the HT and full wave rectification for the grid bias supply, the HT via a mercury vapour rectifier to keep the supply impedance low to the DUT
Lawrence.
The genius of Hikock's patented system was the fact that all of the voltages in the one unit were derived from the one mains transformer and the unit could be calibrated perfectly accurately with just setting the meter circuit calibration, it does not require a reference transconductance device. I wrote a detailed article on this and why this is so and the Hikock's basic circuit including remarks about the anode and grid voltage waveforms under different bias settings, which may be of some interest to the OP:


http://www.worldphaco.com/uploads/Hi...d_the_ACS..pdf
Argus25 is offline   Reply With Quote
Old 14th Sep 2017, 11:48 am   #22
ms660
Dekatron
 
ms660's Avatar
 
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 5,131
Default Re: Measuring half wave voltages on Valve Testers.

Am I seeing a mistake in this from the WD technical manual TM 11-2627 ?

Lawrence.
Attached Thumbnails
Click image for larger version

Name:	I-177bcircuit description.jpg
Views:	23
Size:	73.5 KB
ID:	149425  
ms660 is online now   Reply With Quote
Old 14th Sep 2017, 12:43 pm   #23
David Simpson
Octode
 
Join Date: Mar 2008
Location: Aberdeen, UK.
Posts: 1,395
Default Re: Measuring half wave voltages on Valve Testers.

Many thanks Argus25 for the great Hickok article. A "must read" for all valve testing enthusiasts.
Lawrence and Bill, how far apart are you from each other down there in the remote SE of England ? Or perhaps there are other valve testing enthusiasts nearby ? A "one to one" with Bill to examine his valve testing issues might be a great help. There is nothing to beat a cuppa, scone & chinwag amongst fellow Forum guys in remote corners of the UK. I can vouch for that.

Regards, David
David Simpson is online now   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 5:35 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright ©2002 - 2017, Paul Stenning.