UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Closed Thread
 
Thread Tools
Old 19th Apr 2017, 3:54 pm   #1
supremme
Retired Dormant Member
 
Join Date: Nov 2012
Location: Alicante, EspaƱa.
Posts: 8
Default Yaesu FTDX400

I recently bought a Yaesu FTDX500, has a problem that I can not see what is going on, in all bands I have the maximum power around the upper band limit, 7400 MHz, 14350 MHz, 21400 MHz. I tried adjusting the ferrites of each band without Success, receiving AM noticed that it mixes the stations, and I listen in almost all the way of the vfo until I happen through another commercial transmitter, I think that can be problem of intermediate frequency. In tune the power is somewhat lower than in the rest. And in lsb is something superior than in usb thanks for the attention.
supremme is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 1:24 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.