|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
25th Oct 2014, 10:01 pm | #1 |
Retired Dormant Member
Join Date: May 2009
Location: Norwich, Norfolk, UK.
Posts: 717
|
AVO RF sig gen HF133
I bought this one valve sig gen from a forum member a couple of years ago. It had a known fault that the af modulation did not work. I used it a couple of times and then the fuse blew and it was put aside.
An hours fault finding eventually lead me to a charred resistor broken in 2 inside the neon indicator housing. It had shorted live to neutral. One metal film resistor and all was well again. I would now like to tackle the AF modulation issue, any ideas? Thanks, Rob |