|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
25th Jun 2017, 11:14 am | #1 |
Nonode
Join Date: Feb 2005
Location: Worcestershire, UK.
Posts: 2,533
|
Emiscope 3/1 connections
I currently have a HMV 904 pre-war television on the bench. Unfortunately, the original base connector on the Emiscope 3/1 tube was dismantled and the connections are now flying leads. I know what the each flying lead does but am unsure where their prongs should be mounted in the 'special' base connector.
I have used my limited detective skills to come up with the attached chart, but is it correct? I am unable to confirm it with any data at my disposal. Many thanks, Steve
__________________
https://www.radiocraft.co.uk |
25th Jun 2017, 11:28 am | #2 |
Octode
Join Date: Jan 2009
Location: Falmouth, Cornwall, UK.
Posts: 1,989
|
Re: Emiscope 3/1 connections
Looks fine according to the Manual
__________________
Stephen _________"It`s only an old telly" ___ |
25th Jun 2017, 11:49 am | #3 |
Dekatron
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 3,274
|
Re: Emiscope 3/1 connections
Bases seen from behind.
|
25th Jun 2017, 12:41 pm | #4 |
Nonode
Join Date: Feb 2005
Location: Worcestershire, UK.
Posts: 2,533
|
Re: Emiscope 3/1 connections
Fantastic!
Thanks chaps. Steve
__________________
https://www.radiocraft.co.uk |