|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
10th Sep 2010, 5:16 pm | #1 |
Dekatron
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,642
|
BBC Oscilloscope
Does anyone have any information on the plug-in module AM5/518/105. It's a general purpose Y amplifier for the MN6/502 waveform monitor (oscilloscope).
Mine is missing one of the IC's. The other is SN7510N, but I don't know which socket it is supposed to be in? |
10th Sep 2010, 5:39 pm | #2 |
Retired Dormant Member
Join Date: Dec 2003
Location: North London, UK.
Posts: 6,168
|
Re: BBC Oscilloscope
I'm pretty sure I've got the TIs for the MN6/502. The trick is finding them!
PS: Found the TIs at first attempt! Didn't know there was a general purpose Y plugin for it. All I have are the MN6/502 mainframe, UN1/558 trigger unit and AM1/567 difference amplifier. PPS: The 105 on the end of your number is the serial number. They start at 101 for production units so you have the 5th one that was made. |
10th Sep 2010, 11:55 pm | #3 |
Dekatron
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,642
|
Re: BBC Oscilloscope
Hi Jeff,
I have the documentation for the MN6/502, kindly supplied by the BBC many years ago, and it does refer to the UN1/558 trigger unit and AM1/567 difference amplifier, as block diagrams. However, mine has the GP unit, marked up as being part of the MN6/502 family. I'll have to keep looking ! |