Philips 752a part required - UK Vintage Radio Repair and Restoration Discussion Forum

gezza123 · 29th Jul 2010, 08:07 PM

HI;Guy's I need help to find a part for my 1939 philips 752a,finished it of 3 weeks ago thought it would be a success storey.

How wrong I was ,after reasembly and replacment of lots of caps+ new spkr cloth,and ran for one week, polished cabinet and guess what it has decided to call it a day.So now stripped her down again today only to find that the 1kohm feed to the oscillator coils had burnt out,after I replaced the 1k found that it also has shorted out the coils.:angry
Tried to open them today as you will see from the pics philips have reamed the coils in after they installed them in there cans.

Hsa anyone got one or know where I might find one .(Coil No.3013/528).thank you.Gezza.

maxwell · 29th Jul 2010, 09:12 PM

Hello Gezza.

Don't want to build your hopes up, but I may well have one of these! I have a box full of these Philips cans in the garrage. I will have a look tomorrow.

Regards.

gezza123 · 30th Jul 2010, 07:42 AM

Wow that was quick,thanks for the response maxwell.will you let me know any cost involved please if you find one.and is it ok for me to PM you.Regards Gezza.

maxwell · 30th Jul 2010, 09:56 PM

Sorry Gezza.

I feel bad now! The closest I have are a set for a Mullard MAS3 but they have only the single trimmer access at the top.

Sorry.

gezza123 · 31st Jul 2010, 08:03 AM

Not to worry max,
I will put it on the shelf for now in hope that someone may have more information,thanks again for looking.

So is there anybody out there,(please) that can help me find these osc coils in my first post.Thanks Gezza.

29th Jul 2010, 09:12 PM	#2
maxwell Tetrode Join Date: Apr 2003 Location: St Albans Posts: 59	Re: Philips 752a part required Hello Gezza. Don't want to build your hopes up, but I may well have one of these! I have a box full of these Philips cans in the garrage. I will have a look tomorrow. Regards.

30th Jul 2010, 07:42 AM	#3
gezza123 Pentode Join Date: Mar 2010 Location: Eastham wirral Merseyside Posts: 118	Re: Philips 752a part required Wow that was quick,thanks for the response maxwell.will you let me know any cost involved please if you find one.and is it ok for me to PM you.Regards Gezza.

30th Jul 2010, 09:56 PM	#4
maxwell Tetrode Join Date: Apr 2003 Location: St Albans Posts: 59	Re: Philips 752a part required Sorry Gezza. I feel bad now! The closest I have are a set for a Mullard MAS3 but they have only the single trimmer access at the top. Sorry.

31st Jul 2010, 08:03 AM	#5
gezza123 Pentode Join Date: Mar 2010 Location: Eastham wirral Merseyside Posts: 118	Re: Philips 752a part required Not to worry max, I will put it on the shelf for now in hope that someone may have more information,thanks again for looking. So is there anybody out there,(please) that can help me find these osc coils in my first post.Thanks Gezza.