View Single Post
Old 1st Jan 2012, 5:47 pm   #4
Marconi_MPT4
Heptode
 
Marconi_MPT4's Avatar
 
Join Date: Mar 2011
Location: Dorset, UK.
Posts: 519
Default Re: AKG C60 valve mic

Hi
I assume your C60 has N60A power supply. The valve heater is powered from a regulated 4volt power supply. As mentioned in the previous post, and given the age of this unit there are quite a few electrolytics that may need replacement. Attached circuit for reference. I hope it is legible.

A later AKG SolidTube microphone and power supply came in for repair recently with very severe hum problems. In this instance both HT electrolytics had not only failed but also oozed electrolyte over the PCB.

Cheers

Rich
Attached Thumbnails
Click image for larger version

Name:	AKG C60 and N60A.png
Views:	1825
Size:	33.9 KB
ID:	60521  
Marconi_MPT4 is offline