UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

jim_beacon · 2nd May 2006, 10:55 pm

Kat,

your link to your original combiner diagram is broken - do you have a copy of the diagram anywhere else?

Secondly, when playing with the X modeline, did you just put the 405 version in, and remove the others, or at least comment them out?

Finally, does the sync come out of the card as a combined signal, or as seperate H and V signals? (the VGA data suggested either was possible).

I do at least understand how you arrived at the numbers for the Modeline - an interesting little set of calculations!

Many thanks

Jim.

2nd May 2006, 10:55 pm	#65
jim_beacon Retired Dormant Member Join Date: Mar 2003 Location: Bishop's Waltham, Hants, UK. Posts: 939	Re: PC as a standard convertor Kat, your link to your original combiner diagram is broken - do you have a copy of the diagram anywhere else? Secondly, when playing with the X modeline, did you just put the 405 version in, and remove the others, or at least comment them out? Finally, does the sync come out of the card as a combined signal, or as seperate H and V signals? (the VGA data suggested either was possible). I do at least understand how you arrived at the numbers for the Modeline - an interesting little set of calculations! Many thanks Jim.