Hello Dave,
Quote:
Originally Posted by geofy
...are all the valve heaters alight...
|
This set uses the following valves; DK92, DF91, DAF91, DL94 which are all battery types so there should be no visible glow to be seen from their heaters. If there is
then switch off immediately! Steve's statement below is spot on;
Quote:
Originally Posted by Steve_P
If you can see a glow with these valves, you're seriously overrunning them. They should also come 'straight on'.
|
I have to agree with Andy's assessment regarding the LT supply not reaching one or more of the valves. I've had this problem before in other Vidor sets which use McMurdo socket bases. The forked pin clinchers tend to fracture in the socket and so lose contact with the valve pins.
Regards