View Single Post
Old 20th Aug 2009, 7:33 pm   #20
Simon Gittins
Heptode
 
Join Date: Jan 2006
Location: Cornwall, UK.
Posts: 501
Default Re: Dansette Electrolytic Capacitors

John,
The 3 legs are indeed the common negative connection.

You need to look at the print where these 3 legs connect; if all 3 are linked then it will work as per the labels on your photo. Sometimes one leg goes to an isolated part of print just to anchor the can. The negative connections of the replacement capacitors need to be connected together and to the negative connection point of the original can.
Post a picture of the print side of the board if you're not sure.
Simon Gittins is offline