View Single Post
Old 26th Jun 2007, 10:36 pm   #5
DOFFERY
Retired Dormant Member
 
Join Date: Aug 2004
Location: Blackpool, Lancashire, UK.
Posts: 1,488
Default Re: Akai Ds-4000 Mkii

Don't worry too much if the sleeve/retainer are missing, they are readily available . As mentioned the main problem on the 4000 range is the cam but you may be lucky, other parts are available & the belt is no problem either to obtain or fit. Quality wise it is quite good if set up correctly ie. bias levels etc. & the heads are not worn, however if you are buying unseen ,difficult to check these points. The other main problem if machine has been used extensively is the felt disc on the feed clutch causing problems towards the end of the tape, especially at the lower speed.

Cheers.

Doffery
DOFFERY is offline