View Single Post
Old 11th Mar 2008, 10:31 pm   #10
geofy
Retired Dormant Member
 
Join Date: Jun 2006
Posts: 1,798
Post Re: Vidor CN426 HENLEY

Quote:
Originally Posted by rrdmpb View Post
I believe the expected total current consumption from the LT supply should be around 250mA for the four valve types specified in this set. A reading significantly less than this value would indicate one or more of the valves not drawing from the LT supply. Likely due to either o/c filament(s) or poor contact in the socket base(s).

Regards
The DL94 being center tapped heater, is that 50mA per section or total for that valve expect it is 50mA per section making the 250mA total heater current.

Geof
geofy is offline