Thread: Taylor 61A
View Single Post
Old 10th Aug 2012, 4:19 pm   #7
gezza123
Heptode
 
gezza123's Avatar
 
Join Date: Mar 2010
Location: Eastham, Wirral, Merseyside, UK.
Posts: 788
Default Re: Taylor 61A

Hi,Herald,
I made a booby.

It is two seperate circuits for the heaters, 6.3v for (V2 ECC85)+(V3 ECF80) should require at least 1 amp.
And 6.3v for the V1 12AT7 at 300 ma.

I have now managed to copy the circuit, so you can see that they use the
12AT7 with a seperate Htr.

I can't seem to find a transformer with this heater arrangment and was thinking if I would be able to use one 2Amp heater section without affecting the rest of the circuit, as they also use one off the heaters for 50 c/s X deflection voltage.
Thanks for your input.Gezza
Attached Files
File Type: pdf scan0032.pdf (539.0 KB, 163 views)
gezza123 is offline