View Single Post
Old 23rd Aug 2010, 6:51 pm   #6
Kevin Hoyland
Heptode
 
Join Date: Feb 2009
Location: Rotherham, South Yorkshire, UK.
Posts: 559
Default Re: Taylor 65 B Signal Generator/Never been used

Hello Gezza.

Thanks for your reply. The large capacitor on the side is 2000PF, see the photo. The small one is the same as yours .0005 . Hope this will help you.

I feel the comments that have been made are right to keep the 65B original, so when the valves arrive i will keep them in their boxes at the side of the 65B. I will leave the power cable coiled up as it came from the factory. When you look at the Instruction Manual you can see the coil in the power lead on the front cover is the same as the coil on the side of the generator now. I only have a copy of the manual but if some kind person would part with an original it would be like puting the icing on the cake. I have not powered the 65B up so i think i can still say it is like new.

Regards Kev.
Attached Thumbnails
Click image for larger version

Name:	kevs 65B SigGen 006.jpg
Views:	207
Size:	80.9 KB
ID:	39742  
Kevin Hoyland is offline