View Single Post
Old 1st Feb 2010, 8:52 pm   #13
Ed_Dinning
Dekatron
 
Join Date: Jan 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 8,171
Default Re: Cooper Smith Amplifier

Hi Gonzini, it could be the Copre-Smith Prodigy from OCT/NOV 58 RC. This used 2, ECL82's in UL push-pull with an ECC83 as amp/phase splitter and an EZ81 as rect.
The circuit only shows a single sec winding on the trans, but there are connection details of a small 5 pin plug that can be linked for 3/8/16 ohms.
Main smoothers were rated at 350v, so HT would not be much above 250V.


ED
Ed_Dinning is online now