Quote:
Originally Posted by Linnovice
Problem comes when I move the jumpers to suit the input to the M30. If I set up at the standard level -4 to +17dB it's too hot for the mixer.
|
The problem is that you also need to see if there is a corresponding set of jumpers for the output. If you can't attenuate the output using jumpers, you may have to buy/build a suitable attenuator to go between the A807 and the M30. The normal alignment procedure is to set up the playback side of things first with a standard test tape. Once you've set up the playback side, you can start on the record side.