Re: Bush DAC 90A Conversion
Hi, I acted on Silicon's suggestion this morning.
A 0.1uF cap from V3, Pin 6 to chassis resulted in no stray signal on LW but MW signal still there. This cap was then removed.
A 0.1uF cap from V3, Pin 5 to chassis resulted in success! No stray signal on MW or LW.
Jim Reeves has been playing on Bluetooth for the past hour with no problems.
Am awaiting delivery of a DPST Rocker Switch to enable switching between the radio and BT.
Many thanks for all your inputs to resolve this issue.
Best regards, Charles
|