UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Heatercathodeshort · 19th Feb 2012, 4:26 pm

With the line output stage working correctly I would guess and it is a guess, with a tripler around 12kv. You could certainly try it. It will not harm the MW31-74 even if it is a bit high. Nothing to loose as such. Have you tried a spark test at the DC end? Touch screwdriver to chassis. Should get a reasonable crack. J.

19th Feb 2012, 4:26 pm	#20
Heatercathodeshort Dekatron Join Date: Jun 2005 Location: Warnham, West Sussex. 10 miles south of DORKING. Posts: 9,147	Re: Pye VT2 EHT problems With the line output stage working correctly I would guess and it is a guess, with a tripler around 12kv. You could certainly try it. It will not harm the MW31-74 even if it is a bit high. Nothing to loose as such. Have you tried a spark test at the DC end? Touch screwdriver to chassis. Should get a reasonable crack. J.