UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

G4GNU Andy · 2nd Oct 2011, 3:04 pm

Help please! I have acquired an early R200 (s/n 9896) and it is dead! The first thing I noticed on taking apart is that the waveband switch was very loose and had obviously been turned round a few times, twisting the wires and causing 3 to come adrift! I have no circuit diagram or schematic or anything that would tell me where to re-connect the wires that have come away (pink from tuning cap, orange from ferrite rod and black from pcb. Can anyone please help? Thanks in advance!

2nd Oct 2011, 3:04 pm	#1
G4GNU Andy Retired Dormant Member Join Date: Oct 2011 Location: Rayleigh, Essex, UK. Posts: 4	Roberts R200 schematic Help please! I have acquired an early R200 (s/n 9896) and it is dead! The first thing I noticed on taking apart is that the waveband switch was very loose and had obviously been turned round a few times, twisting the wires and causing 3 to come adrift! I have no circuit diagram or schematic or anything that would tell me where to re-connect the wires that have come away (pink from tuning cap, orange from ferrite rod and black from pcb. Can anyone please help? Thanks in advance!