View Single Post
Old 3rd Oct 2011, 1:17 pm   #4
G4GNU Andy
Retired Dormant Member
 
Join Date: Oct 2011
Location: Rayleigh, Essex, UK.
Posts: 4
Default Re: Roberts R200 schematic

Thanks Darren and Geoff, I found the link to the service manual but being tight, I just wanted to replace the fallen off wires first to see if that did the trick, if not then I will definitely invest in the service manual. Your photo (rb2.jpg) would have helped Geoff, but the model I have has a rotary switch with 4 inner (poles) that can each switch to 3 separate positions. This is from memory as I am at work and the radio is at home! If anyone can just give me the wiring detail of this switch (or a photo) that would be great. Thanks again!

I was told the radio was working but that was obviously before the wavechange switch came loose and was swivelled round several times! This is why I am hopeful that just re-soldering these 3 wires back on will do the trick.
G4GNU Andy is offline