View Single Post
Old 13th May 2017, 11:34 am   #13
2ombieboy
Pentode
 
Join Date: Jan 2010
Location: Rotherham, South Yorkshire, UK.
Posts: 201
Default Re: HDMI to AV converter with Aurora - aspect ratio problem

Hi i have done this myself with one of my tvs. but to get the correct aspect ratio you need an older pc. i use a vga to composite took the yellow wire from the converter and the audio from the pc using a jack to composite splitter. than ran it in to a rf modulator and to the tv. i can do a video of the setup if anyone wants to see it. reason for the older pc it has support for 4:3 at low resolutions.

i also have done the same with hdmi but setup diftently. i used a hdmi to component converter and used a newer vcr with component in and recorded pc to vhs tape. iused the vcr modulator to send picture to tv. but this method you get overscan

Alan
__________________
On YouTube since 2009
https://www.youtube.com/c/2ombieboysvhsvault
2ombieboy is offline