Thread: Pye 15a problem
View Single Post
Old 8th Aug 2008, 7:42 pm   #10
Steve_P
Dekatron
 
Steve_P's Avatar
 
Join Date: Sep 2003
Location: Bolton, Greater Manchester, UK.
Posts: 6,645
Default Re: Pye 15a problem

Don't ever switch things on without at least checking at least fuses, mains wiring and condition. You now have a set which could have anything wrong with it, new faults as well as old. It could also have been dangerous....

Start at the mains plug. Make sure it's wired right and check the fuse.

Make sure that the Single Pole On/Off switch is switching live. See if there is continuity across the mains transformer. If there is, take the set apart and check thouroughy. If not, check the wire and switch. I hope the mains transformer hasn't gone.

On the secondary side, the rectifier valve is separate, so if this is out as well as the valves, then the mains transformer is at fault unless all the heaters have gone. If the Recky is lit, then the same applies on the other winding.

I hope this is simple. This is a short superhet, and the EBL31 is a difficult valve to get. Change C20.

I have used Trader Sheet 751.

Cheers,

Steve P.
__________________
If we've always had it, why is the Car Boot open? You're not sneaking another Old TV in are you...?
Steve_P is online now