View Single Post
Old 17th Apr 2012, 5:23 pm   #18
Refugee
Dekatron
 
Refugee's Avatar
 
Join Date: Apr 2012
Location: Worksop, Nottinghamshire, UK.
Posts: 5,549
Default Re: Trouble with a 706 faint dial tone.

What is confusing here is that there may be a little crack in a PCB track. If visual inspection fails each track will have to be measured with a low ohms range from point to point as the cracks often appear at the edge of the solder pad between the copper and the soldered copper and are hard to see.
Refugee is offline