View Single Post
Old 5th Aug 2008, 10:25 pm   #9
Mike-repairman
Heptode
 
Mike-repairman's Avatar
 
Join Date: Jun 2008
Location: Cambridgeshire, UK.
Posts: 613
Default Re: Eiki NT1 16mm optical sound projector

Hi villelaustela,

The picture of the one above looks like a much earlier model to mine.
The NT range is as follows...
NT1 is optical sound, NT2 is optical and magnetic, and NT3 is optical, magnetic with record function. The NT3 would be highly desirable but guess there were not that many made compared to the standard NT1.

I have no problem with the belts; they have obviously been replaced and there were stickers on the projector from a servicing company; I guess they were used perhaps by a school who had them looked after. Nice clear steady picture.

Did a bit of lubrication as per the Service Manual and knocked off another dB of operating noise.
Still a bit noisier than the B&H ones but not that noticeable.

http://i7.photobucket.com/albums/y29...man77/NT1s.jpg

Mike.
Mike-repairman is offline