View Single Post
Old 18th Jul 2013, 8:01 pm   #2
Sean Williams
Dekatron
 
Sean Williams's Avatar
 
Join Date: Feb 2005
Location: St.Ippolyts, Hitchin, Hertfordshire QRA IO91UW
Posts: 3,517
Default Re: Mutek Masthead preamp info needed

Voltage will be 13.8v.

Open it up, and trace the circuit for the power connector - one will be ground, one most likeley PTT, and the other VCC.

Through switching is likely to be around 100W maximum.

it may also be able to do RF sense switching - this is not a good thing - too unreliable.

Cheers
Sean
__________________
Engineers make things work and have spare bits when finished
Sean Williams is offline