View Single Post
Old 8th May 2012, 10:30 pm   #5
Trebor1220
Retired Dormant Member
 
Join Date: May 2012
Location: South Yorkshire
Posts: 3
Default Re: Hameg 203-6 oscilloscope

H'i (Hi,)

I think I've found the problem, on the Y-Pos II (VR705) pot it read over 700+ ohms and the value on the diagram should be 470 ohms, tested this by adding a 1.2K across VR705 to bring value down. Now it reads 2V pp. So now it's time to order a new 470 ohm pot. Thanks guys for the input.

Many thanks,
Rob
Trebor1220 is offline