UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - How To Wire Up A Stereo Cartridge To A Mono Record Player?

Audio1950 · 6th May 2012, 8:11 pm

Either join the two positive and two negative pins on the cartridge itself with fine wire (fiddly) and then connect the two existing wires, or join the two "positives" and "negatives" (earths) at the tag strip under the deck. Doesn't really matter how you do it, as long as the two channels are joined before the amp.

Barry

6th May 2012, 8:11 pm	#3
Audio1950 Dekatron Join Date: Nov 2008 Location: Whittlesey, near Peterborough, Cambridgeshire, UK. Posts: 3,761	Re: How To Wire Up A Stereo Cartridge To A Mono Record Player? Either join the two positive and two negative pins on the cartridge itself with fine wire (fiddly) and then connect the two existing wires, or join the two "positives" and "negatives" (earths) at the tag strip under the deck. Doesn't really matter how you do it, as long as the two channels are joined before the amp. Barry