View Single Post
Old 31st Mar 2017, 10:41 am   #2
marsbar
Triode
 
Join Date: Apr 2011
Location: Stavanger, Norway .
Posts: 49
Default Re: Finally, figured out my Bang Olufsen LX 2800

Here are some pictures over the job done.

Main PSU board: All caps except the big yellow one is replaced.

Picture driver board: There are several pot's. These all correspond to

the various picture adjustment, vertical and horizontal.

Marked with a screwdriver is pot R111.

However, pots are not clearly listed in the manual with correct symbol.

In other manuals, like Japanese, there is a symbol stating what each pot does...

If you attempt to adjust these I suggest making a map with location of pot and a figure what the pot does.

Also, a good idea is to measure R with power off using a multi-meter before you start fiddling so you have something to go back to if you need.
Attached Thumbnails
Click image for larger version

Name:	IMG_20170331_111928.jpg
Views:	250
Size:	69.2 KB
ID:	140160   Click image for larger version

Name:	IMG_20170331_112020.jpg
Views:	282
Size:	67.4 KB
ID:	140161  

Last edited by marsbar; 31st Mar 2017 at 10:52 am.
marsbar is offline