UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Tektronix 465B Scope

davidgem1406 · 4th Jul 2013, 12:13 am

I will try what Leon suggested about joining the plates together. I wont however try to remove the connectors from the CRT pins I will unsolder the wire connections at the PCB.
I have just looked at them 1 pair is dead easy to do the Y is rather tight on space but it will be done.

I can then put them back 1 pair at a time, maybe that will help locate what is going on.

Dave.

4th Jul 2013, 12:13 am	#56
davidgem1406 Heptode Join Date: Feb 2011 Location: Sheerness, Kent, UK. Posts: 936	Re: Tektronix 465B Scope - Some problems. I will try what Leon suggested about joining the plates together. I wont however try to remove the connectors from the CRT pins I will unsolder the wire connections at the PCB. I have just looked at them 1 pair is dead easy to do the Y is rather tight on space but it will be done. I can then put them back 1 pair at a time, maybe that will help locate what is going on. Dave.